Well, it’s new to ME. I’ve been seeing the paper feathers made from vintage sheet music and book pages on Pinterest for a while now. Initially they didn’t really appeal to me; but I decided to try my hand at a few to see how difficult they were to make . . . . and BAM!! I’m hooked! I love them and I really enjoy making them.
My biggest issue with all the ones I was seeing on Pinterest was coming up with something sturdier than just wire for the stems. Bamboo skewers worked perfectly. I made the smaller size feathers using the regular size skewers, and some bigger square-shaped ones (closer to chop-stick diameter) for the bigger ones that I made.
I used several different kinds and colors of book pages. The yellowed sheet music shown above and some varying shades of white dictionary and book pages.
SUPPLY LIST:
Paper: old book pages, sheet music, dictionary pages or ANY other paper
Bamboo skewers for the stems
Thinned down tacky glue: for gluing the two layers of paper to the stem. Add just enough water to your tacky glue that it’s easily brushed on with a paint brush.
Scissors for cutting out the leaf shapes and feathering.
Mod Podge: apply one coat to each side of your feather shape BEFORE cutting your slits.
As with just about any crafting I do, I prefer to work in an assembly line style. I selected the vintage papers that I wanted to work with and readied the rest of my supplies.
- Fold paper in half so you get two matching pieces of each leaf shape that you cut.
- With your thinned tacky glue, evenly coat one side of a leaf and put glue down the center only of the matching leaf.
- Place your skewer in the center of the fully glued leaf, and lay the other leaf on top. Gently press along the skewer with your fingers to get the glue to grab it; and smooth the edges to be sure they are completely glued together.
- Set aside for several hours for the glue to completely dry and cure. (overnight is best) Your paper will curl a bit from the moisture in the glue, but you WANT that to happen. It gives them a more natural feel.
5. Vintage paper can be very brittle. I ruined several of mine just handling them and gluing them together. To strengthen your final product, apply a coat of matte finish Mod Podge to each side; one side at a time.
Mod podge dries pretty fast, adds a little more ‘character curls’ to your paper and will help your feathers last a lot longer. The mod podge gives the paper a bit of a plastic coated feel. If you aren’t sure if you will like the look and feel of the added Mod Podge, just do ONE feather with it as a test, and one without it; to see which you like best. A little bit of the Mod Podge is going to seep over to the other side of the feather, so be sure you lay them to dry on something ‘raised’. Across an open box or on a cookie cooling rack.
6. Gather up your dried feathers and grab your scissors.
Go through your entire batch of them making your first ‘V’ cuts; 3-5 cuts per side, depending upon the size of the feather. I always keep the total number of cuts as odd number. IE 3 on one side and 4 on the other. These cuts are going to be the GUIDES for your smaller cuts, so be sure you make the cuts in the direction that you are going to want ALL your cuts to go.
7. After you have made those cuts in your entire batch, go back and do the feathering cuts on all of them. Make your cuts as close together as you can, and cut as close to the stem as you can.
Here are the different kinds of paper/ shapes and sizes that I made.
As you may have guessed from the above pictures, they can become quite addicting to make!!
NOW, I just have to figure out how to use them and display them to sell in my booth at Stars! Suggestions are welcome!
AJ's Trash2Treasure BLOG 